HP ProBook 6450b - Notebook PC User Manual

Changing a DriveLock password
To change a DriveLock password in Computer Setup, follow these steps:
1. Turn on the computer, and then press esc while the “Press the ESC key for Startup Menu” message
is displayed at the bottom of the screen.
2. Press f10 to enter BIOS Setup.
3. Use a pointing device or the arrow keys to select Security > DriveLock password, and then press
enter.
4. Use a pointing device to select an internal hard drive.
– or –
Use the arrow keys to select an internal hard drive, and then press enter.
5. Use a pointing device or the arrow keys to select the password you want to change.
6. Type your current password in the Old password field, type a new password in the New
password and Verify new password fields, and then press enter.
7. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.
120 Chapter 10 Security

HP ProBook 6450b - Notebook PC Specifications

General

Processor	Intel Core i5 or i7
RAM	Up to 8 GB DDR3
Operating System	Windows 7 Professional
CPU	Intel Core i5 or i7
Storage	Up to 500GB HDD or 256GB SSD
Display	14.0-inch diagonal LED-backlit HD anti-glare (1366 x 768 resolution)
Graphics	Intel HD Graphics
Battery	6-cell Li-ion
Chipset	Intel QM57
Optical Drive	DVD+/-RW SuperMulti DL
Wireless	802.11a/b/g/n
Audio	Stereo speakers, microphone
Ports	DisplayPort, VGA, RJ-45
Card Reader	5-in-1
Webcam	2 MP Webcam (optional)