EasyManuals Logo

HP ProBook 6450b - Notebook PC User Manual

HP ProBook 6450b - Notebook PC
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
Solving travel connection problems
If you experience modem connection problems when using the computer outside of the country or region
in which you purchased it, try the following suggestions.
ā—
Check the telephone line type.
The modem requires an analog, not a digital, telephone line. A line described as a PBX line is
usually a digital line. A telephone line described as a data line, fax machine line, modem line, or
standard telephone line is usually an analog line.
ā—
Check for pulse or tone dialing.
An analog telephone line supports one of 2 dialing modes: pulse dialing or tone dialing. These
dialing mode options are selected in the Phone and Modem Options settings. The dialing mode
option selected must match the dialing mode supported by the telephone line in your location.
To determine the dialing mode supported by a telephone line, dial a few digits on the telephone,
and then listen for clicks (pulses) or tones. Clicks indicate that the telephone line supports pulse
dialing. Tones indicate that the telephone line supports tone dialing.
To change the dialing mode in your current modem location setting, follow these steps:
1. Select Start > Control Panel > Hardware and Sound > Phone and Modem Options.
2. Then click the Dialing Rules tab.
3. Select your modem location setting.
4. Click Edit.
5. Click either Tone or Pulse.
6. Click OK twice.
ā—
Check the telephone number you are dialing and the response of the remote modem.
Dial a telephone number, make sure there is a response from the remote modem, and then hang
up.
ā—
Set the modem to ignore dial tones.
If the modem receives a dial tone it does not recognize, it does not dial and displays a ā€œNo Dial
Toneā€ error message.
To set the modem to ignore all dial tones before dialing, follow these steps:
1. Select Start > Control Panel > Hardware and Sound > Phone and Modem Options.
2. Then click the Modems tab.
3. Click the listing for the modem.
4. Click Properties.
5. Click Modem.
6. Clear the check box for
Wait for dial tone before dialing.
7. Click OK twice.
Using the modem (select models only) 37

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProBook 6450b - Notebook PC and is the answer not in the manual?

HP ProBook 6450b - Notebook PC Specifications

General IconGeneral
ProcessorIntel Core i5 or i7
RAMUp to 8 GB DDR3
Operating SystemWindows 7 Professional
CPUIntel Core i5 or i7
StorageUp to 500GB HDD or 256GB SSD
Display14.0-inch diagonal LED-backlit HD anti-glare (1366 x 768 resolution)
GraphicsIntel HD Graphics
Battery6-cell Li-ion
ChipsetIntel QM57
Optical DriveDVD+/-RW SuperMulti DL
Wireless802.11a/b/g/n
AudioStereo speakers, microphone
PortsDisplayPort, VGA, RJ-45
Card Reader5-in-1
Webcam2 MP Webcam (optional)

Related product manuals