15 Management and printing
Using Client Management Solutions
Client Management Solutions software provides standards-based solutions for managing client (user)
desktop, workstation, notebook, and tablet computers in a networked environment.
Client management includes the following key capabilities and features:
●
Initial software image deployment
●
Remote system software installation
●
Software management and updates
●
ROM updates
●
Tracking and security of computer assets (the hardware and software installed on the computer)
●
Fault notification and recovery of certain system software and hardware components
NOTE: Support for specific features described in this section may vary, depending on computer model
and/or version of management software installed on the computer.
Configuring and deploying a software image
The computer is shipped with a preinstalled system software image. The initial software image is
configured during the first-time setup of the computer. After a brief software "unbundling" occurs, the
computer is ready to be used.
A customized software image can be deployed (distributed) in one of the following ways:
●
Installing additional software applications after unbundling the preinstalled software image
●
Using software deployment tools, such as Altiris Deployment Solutions, to replace the preinstalled
software with a customized software image
●
Using a disk-cloning process to copy the contents from one hard drive to another
The deployment method you use depends on your organization's technology environment and
processes.
NOTE: The Computer Setup utility and other system features provide further assistance with
configuration management and troubleshooting, power management, and the recovery of system
software.
Using Client Management Solutions 153
To Next Page
Loading...
Need help?
General
