HP ProCurve 5412ZL Access Security Guide

RADIUS Authentication and Accounting
Configuring the Switch for RADIUS Authentication
After two attempts failing due to
username or password entry
errors, the switch will terminate
the session.
Global RADIUS parameters
from figure 6-5.
These two servers will use the
global encryption key.
Server-specific encryption key
for the RADIUS server that will
not use the global encryption
key.
Note: The Webui access task
shown in this figure is available
only on the switches covered in
this guide.
Figure 6-6. Listings of Global RADIUS Parameters Configured In Figure 6-5
6-18

HP ProCurve 5412ZL Specifications

General

Input Voltage	100-240 VAC
Jumbo Frame Support	Yes
Layer	Layer 3
Port Type	10/100/1000Base-T, SFP
Management	CLI, Web, SNMP