HP ProCurve 5412ZL Access Security Guide

Virus Throttling
Basic Connection-Rate Filtering Configuration
Viewing and Managing Connection-Rate Status
The commands in this section describe how to:
■ View the current connection-rate configuration
■ List the currently blocked hosts
■ Unblock currently blocked hosts (on a per-VLAN basis).
Viewing the Connection-Rate Configuration
Use the following command to view the basic connection-rate configuration.
If you need to view connection-rate ACLs and/or any other switch configura-
tion details, use show config or show running (page
3-17).
Syntax: show connection-rate-filter
Displays the current global connection-rate status
(enabled/disabled) and sensitivity setting, and the cur-
rent per-port configuration. This command does not
display the current (optional) connection-rate ACL con-
figuration, if any.
Per-Port configuration for
connection-rate filtering
Figure 3-4. Example of Displaying the Connection-Rate Status, Sensitivity, and Per-
Port Configuration
3-16

HP ProCurve 5412ZL Specifications

General

Input Voltage	100-240 VAC
Jumbo Frame Support	Yes
Layer	Layer 3
Port Type	10/100/1000Base-T, SFP
Management	CLI, Web, SNMP