To Next Page

To Previous Page

Getting Started

To Set Up and Install the Switch in Your Network

To Set Up and Install the Switch in Your

Network

Physical Installation

Use the ProCurve Installation and Getting Started Guide (shipped with the

switch) for the following:

■ Notes, cautions, and warnings related to installing and using the switch

and its related modules

■ Instructions for physically installing the switch in your network

■ Quickly assigning an IP address and subnet mask, set a Manager pass-

word, and (optionally) configure other basic features.

■ Interpreting LED behavior.

For the latest version of the Installation and Getting Started Guide for your

switch, refer to “Getting Documentation From the Web” on page 1-7.

Premium Edge Switch Features

The ProCurve 3500yl and 5400zl switches ship with the ProCurve Intelligent

Edge software feature set. Additional Premium Edge switch software features

for these switches can be acquired by purchasing a Premium Edge license and

installing it on the Intelligent Edge version of these switches. Part numbers

for the Premium Edge licenses are:

■ 3500yl switches: J8993A

■ 5400zl switches: J8994A

(Note that the ProCurve 6200yl switch is available only as a Premium Edge

switch .)

For the most current information about the features included in the Premium

Edge package, refer to the release notes for your product on the ProCurve

Networking web site. The Premium Edge License is available from your

ProCurve reseller.

1-9

HP ProCurve 5412ZL Access Security Guide

Other manuals for HP ProCurve 5412ZL