HP ProCurve 5412ZL Access Security Guide

Configuring Port-Based and Client-Based Access Control (802.1X)
802.1X Open VLAN Mode
Condition Rule
Effect of RADIUS-assigned VLAN The port joins the RADIUS-assigned VLAN as an untagged member.
This rule assumes no other authenticated
clients are already using the port on a
different VLAN.
IP Addressing for a Client Connected A client can either acquire an IP address from a DHCP server or use
to a Port Configured for 802.x Open a manually configured IP address before connecting to the switch.
VLAN Mode
802.1X Supplicant Software for a A friendly client, without 802.1X supplicant software, connecting to an
Client Connected to a Port Configured authenticator port must be able to download this software from the
for 802.1X Open VLAN Mode Unauthorized-Client VLAN before authentication can begin.
Switch with a Port Configured To When a new client is authenticated on a given port:
Allow Multiple Authorized-Client •
Sessions
•
If no other clients are authenticated on that port, then the port joins
one VLAN in the following order of precedence:
a. A RADIUS-assigned VLAN, if configured.
b. An Authenticated-Client VLAN, if configured.
c. A static, port-based VLAN to which the port belongs as an
untagged member.
d. Any VLAN(s) to which the port is configured as a tagged
member (provided that the client can operate in that VLAN).
If another client is already authenticated on the port, then the port
is already assigned to a VLAN for the previously-existing client
session, and the new client must operate in this same VLAN,
regardless of other factors. (This means that a client without 802.1X
client authentication software cannot access a configured,
Unauthenticated-Client VLAN if another, authenticated client is
already using the port.)
10-33

HP ProCurve 5412ZL Specifications

General

Input Voltage	100-240 VAC
Jumbo Frame Support	Yes
Layer	Layer 3
Port Type	10/100/1000Base-T, SFP
Management	CLI, Web, SNMP