Drives
Description
Hard drive
2 TB, 7200 rpm, 3.5 inch
1 TB, 7200 rpm, 3.5 inch
1 TB hard drive, hybrid SSD
500 GB, 7200 rpm, 3.5 inch
500 GB, 7200 rpm, 2.5 inch, self-encrypting (SED)
500 GB, 5400 rpm, 2.5 inch, FIPS
500 GB hard drive, hybrid SSD
256-GB Solid-state Drive (SSD), self-encrypting (SED), 2.5-inch
256-GB Solid-state Drive (SSD), 2.5-inch
180-GB Solid-state Drive (SSD), MLC, 2.5-inch
180-GB Solid-state Drive (SSD), 2.5-inch
128-GB Solid-state Drive (SSD), 2.5-inch
128-GB Solid-state Drive (SSD), self-encrypting (SED), 2.5-inch
128-GB Solid-state Drive (SSD), NAND, 3D, 2.5-inch
120-GB Solid-state Drive (SSD), MLC, 2.5-inch
120-GB Solid-state Drive (SSD), 2.5-inch
Optical drive
Blu-ray BD-RW SuperMulti XL Drive
DVD±RW drive
DVD-ROM drive
When installing drives, follow these guidelines:
●
The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector
on the system board labeled SATA0.
●
Connect an optical drive to the light blue SATA connector on the system board labeled SATA1.
28 Chapter 4 Removal and replacement procedures: Small Form Factor
To Next Page
Loading...
