System BIOS configuration 11
Table 3 Boot Settings Configuration submenu fields
Field Description Options
This option does not enable the keyboard Number Lock automatically. To use the
10-keys on the keyboard, press the Number Lock key located on the upper left-
hand corner of the 10-key pad. The Number Lock LED on the keyboard will light
up when the Number Lock is engaged. This is the default setting.
Disabled
POST F1 Prompt Set this value to allow wait up to 15 seconds for an F1 press. The Setting default
value is Delayed.
Delayed
Set this value to allow wait indefinitely for an F1press. Enabled
Set this value to continue boot process without waiting for an F1 press. Disabled
Restore on AC
Power Loss
Set this value to restore previous power state before loss occurred. The Setting
default value is Last State.
Last State
Set this value to always boot when AC power is restored. Power on
Set this value to keep power off until the power button is pressed. Power Off
Advanced menu
Figure 5 Advanced menu
NOTE: The CPU Configuration setup screen varies depending on the installed processors.
To Next Page
Loading...
