System BIOS configuration 26
Boot Menu
Figure 17 Boot Menu
Table 15
Boot Menu fields
Field Description
Boot Device Priority Use this screen to specify the order in which the system checks for the device
to boot from. To access this screen, select Boot Device priority on the Boot
setup screen and press <Enter>. The Boot Device Priority screen is displayed.
Hard Disk Drives
Use this screen to view the hard disk drives in the system. To access this
screen, select Hard disk drives on the Boot Setup screen and press <Enter>.
Then you can select it as the first boot device or disabled it as the 1st Drive.
Embedded NIC Port 1 PXE The option specifies the embedded NIC Port 1 PXE. The setting default value is
Enabled.
Embedded NIC Port 2 PXE The option specifies the embedded NIC Port 2 PXE. The setting default value is
Disabled.
NIC2 Port
The option specifies the NIC Port2 .the default is enabled
Boot Device Priority submenu
To change the boot order, select a boot category type such as Hard disk drives, Removable media or
ATAPI CD ROM devices from the boot menu. For example, if the 1st boot device is set to Hard disk
drives, then BIOS will try to boot from hard disk drives first.
To Next Page
Loading...
