NOS installation 55
SUSE Linux Enterprise Server 10 Installation
Section1. Installing SUSE Linux Enterprise Server 10
1. Turn on the server and insert the SUSE Linux Enterprise Server 10 (SLES10) CD 1.
2. Reboot the system to the SLES10 CD 1.
3. Select Installation, then press Enter to proceed to the customization of your installation.
Section2. Customizing the Installation
Language
Select the language you prefer for the installation, then click Accept to continue.
Media Check
Skip this stage of the installation. Click Next to continue.
License Agreement
Read the license agreement. If the terms of the agreement are acceptable, click Yes, I agree to the
license agreement, then click Next to continue.
Installation Mode
Click New Installation, then click Next to continue.
Clock and Time Zone
Modify the Clock and Time Zone settings, then click Next to continue.
Installation Setting
1. Review the default installation settings and modify them to meet your network environment.
2. Click Accept to initialize the installation process.
3. Click Install to start the file copying.
The system automatically reboots once the first part of the file copying is completed. You may be
prompted to insert the rest of the SLES10 CD-ROMs, depending on the packages you have
chosen to install.
Section3. Completing the installation
Hostname and Domain Name
Set host name and domain name, then click Next to continue.
Password for the System Administrator
Enter a root password consisting of at least six alphanumeric characters, then click Next to continue.
Network Configuration
Review the Network Configuration settings and verify that they fit your environment, then click Next to
continue.
Test Internet Connect
Review the Network Configuration settings and verify that they fit your environment, then click Next to
continue.
To Next Page
Loading...
