NOS installation 53
Type root and the password you set during the NOS installation, then press Enter.
Installing SUSE Linux Enterprise Server NOS
The procedures in this section apply to the SUSE Linux Enterprise Server NOS, version 9 and 10.
Installation flow
1. Install SUSE Linux Enterprise [version]. For the specific procedure for each SLE NOS version,
refer to the following sections.
2. Install additional HP accessories.
The HP DL160 G5p Server Support CD includes the drivers for accessories compatible to your
server.
Refer to the product manual enclosed with the accessory for the detailed installation procedure
and/or to the attached readme.txt file associated with the driver. The readme.txt file can be
found on the appropriate driver diskette.
Pre-installation instructions
1. Complete the NOS pre-installation procedures.
2. Have the following installation requirements on hand:
○ HP DL160 G5p Server Support CD
○ SUSE Linux Enterprise Server CD-ROMs
− SUSE Linux Enterprise Server 9 – 6 discs
− SUSE Linux Enterprise Server 10 – 4 discs
○ A Windows PC that has a:
− Floppy drive
− Optical media drive
− Browser that supports HTML
○ Two or more clients for testing purposes (optional)
SUSE Linux Enterprise Server 9 installation
Section 1. Installing SUSE Linux Enterprise Server 9
1. Turn on the server and insert the SUSE Linux Enterprise Server 9 (SLES9) CD 1.
2. Reboot the system to the SLES9 CD 1.
3. Select Installation, then press Enter to start the installation.
4. Remove the SLES9 SP2 CD1 and insert the SLES9 CD 2 once prompted.
5. Press Enter to proceed to the customization of your installation.
Section2. Customizing the installation
Software License Agreement
Read the license agreement. If the terms of the agreement are acceptable, click I Agree.
To Next Page
Loading...
