System BIOS configuration 15
IDE Configuration submenu
Figure 7 IDE Configuration submenu
Table 6
IDE Configuration submenu fields
Field Description Options
ATA/IDE Configuration
Set this value to support Enhanced mode. The Setting default
value is Enhanced.
Enhanced
Set this value to prevent the computer system from using IDE
and SATA device.
Disabled
Setting this mode to support compatible mode. Compatible
Configure SATA as Setting this value configure SATA as IDE mode. The Setting
default value is IDE.
IDE
Setting this value configure SATA as RAID mode. RAID
Legacy IDE Channels Set this value only support SATA device. SATA Only
Set this value support PATA as primary device, select SATA
as secondary device.
Note: Select this mode; Only support SATA port2, SATA port
4, and IDE device.
PATA Pri.
SATA Sec
To Next Page
Loading...
