System BIOS configuration 20
Figure 11 Serial Port Configuration submenu
Table 10
Serial Port Configuration submenu fields
Field Description Options
Serial Port Assignment This setting will assign the serial port connector to
the system. The setting default value is System.
System
This setting will assign the serial port connector to
the BMC (baseboard management controller).
BMC
Serial Port Switching This setting allows the Serial port switch between
system and BMC. The setting default value is
Enabled.
Enabled
This setting will prevent the Serial port from
switching between system and BMC.
Disabled
Serial Port Connection Mode Serial port connection mode is Direct. The setting
default value is Direct.
Direct
Serial port connection mode is Modem. Modem
To Next Page
Loading...
