Removal and replacement procedures 32
6.
Remove the fan assembly.
To replace the component, reverse the removal procedure.
BBWC battery
To remove the component:
1. Power down the server (on page 26).
2. Extend the server from the rack (on page 26).
3. Remove the access panel.
4. Remove the fan assembly ("Fan assembly" on page 31).
5. Disconnect cables from any devices installed in the media cage, if necessary ("Media cage cables"
on page 47).
6. Remove the BBWC battery.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
