c. Remove the fan module.
Caution:
To avoid server shutdown, a fan must be replaced within 60 seconds of being removed.
3. To replace the component:
a. Install the Fan Module.
b. Install the access panel.
c. Slide the server into the rack.
Related links
Thermal (fan) problems on page 29
Maintaining and Troubleshooting the HP ProLiant DL360 G9 Server
November 2015 Maintaining and Troubleshooting the HP ProLiant DL360 G9 Server 32
Comments on this document? infodev@avaya.com
To Next Page
Loading...
