HP ProLiant DL380 Generation9

QuickSpecs
HP ProLiant DL380 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
c04375627 – DA – 15034 North America — Version 7 — February 17, 2015
Page 20
Power specifications and technical content for all HP Server power supplies can be found at
http://www.hp.com/go/proliant/powersupply.
NOTE: Maximum of 2 Flex Slot PS per platform.
Step 3: Choose Additional Factory Integratable Options
HP Storage Controllers
NOTE: The embedded B140i controller will be used as the primary controller if no controller has been selected from
the list below. Embedded SATA controller can support up to 8 SATA hard drives. Cable kit may be required
HP Flexible Smart Array Controllers
HP Smart Array P440ar/2GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: Includes the HP Smart Storage Battery.
749974-B21
HP Smart Array Controllers
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: Includes the HP Smart Storage Battery.
761872-B21
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Includes the HP Smart Storage Battery.
761874-B21
HP Smart Host Bus Adapters
HP H240ar 12Gb 2-ports Int FIO Smart Host Bus Adapter
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
749976-B21
HP Cable Options
HP DL380 Gen9 12LFF Rear 2SFF or 3LFF P840/440 SAS Cable Kit
783007-B21
HP DL380 Gen9 2SFF Front SAS x4 Cable Kit
NOTE: Required for front mount 2SFF to H240/P440ar, H240 or embedded B140i SATA controller
783008-B21
HP DL380 Gen9 8SFF SAS Cable Kit
NOTE: Required for 8/16/24 SFF models for use with P840/440 Controllers
783009-B21
HP DL380 Gen9 2SFF x8 Front Cable Kit
NOTE: Required for front/rear mount 2SFF to P440/840 PCIe controller
785989-B21
HP DL380 Gen9 12LFF SAS Cable Kit
NOTE: Required for 12LFF models with P440/840 PCIe controllers
785991-B21
HP DL380 Gen9 8SFF H240 Cable Kit
NOTE: Required for 8/16/24 SFF models for use with H240/P440ar, H240 PCIe or embedded B140i
SATA controller.
786092-B21
HP DL380 Gen9 12LFF H240 SAS Cable Kit
NOTE: Required for 12LFF models with H240/P440ar, H240 or embedded B140i SATA controller
786215-B21
BIOS Mode
HP Legacy FIO Mode Setting
758959-B22
NOTE: If selected, then B140i will not be supported and can no longer be a primary controller
therefore, SAS internal controller must be selected to be the primary controller.
Controller State
HP FIO Enable B140i Setting
NOTE: Must be selected when B140i is used as the primary controller and RAID is desired
784308-B21
HP Mfg FIO Enable HBA Mode Setting
NOTE: When selected if H240ar/H240 are used as the primary controller then RAID is not allowed.
792962-B21
HP Unique Options
HP 2SFF Front SPEC Perf FIO Mount
NOTE: May only be selected with 8SFF CTO Server and optical media cage kit and 2SFF Drive cage
option. When this option is selected, a primary controller is not required for the 8SFF CTO Server.
787945-B21
HP Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO License
C6N36A
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO Electrong License
C6N36ABE
HP Converged
Infrastructure
Management Software
HP OneView Advanced (with HP iLO Advanced)
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
E5Y43A