HP ProLiant N40L User Manual

media
T H E U L T I M A T E
s y s t e m
7
After pressing ENTER it will start creating the OpenELEC USB Key for you, which will be
used to install OpenELEC and XBMC on to your HTPC.
Now everything should be ready, and we can move on to the HTPC itself. Yay!
Wow, that was quick!
CREATING A USB KEY
Create the OpenELEC USB Key
CHECK THE USB
Let’s just have a quick look on the flash drive to see if all the files
have been created for us.
It should be fine though...
You should have the following files:
Autorun.ini, CHANGELOG, INSTALL, KERNEL, KERNEL.md5,
openelec, README, RELEASE, syslinus.cfg, SYSTEM and
SYSTEM.md5

HP ProLiant N40L Specifications

General

Power Supply	150W Non-Hot Plug, Non-Redundant Power Supply
Form Factor	Ultra Micro Tower
Chipset	AMD RS785E/SB820M
Processor	AMD Turion II Neo N40L Dual-Core (1.5 GHz)
Memory	Up to 8 GB (2 x DDR3 ECC Unbuffered DIMM slots)
Network	Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Hard Drives	Supports up to 4 x 3.5 inch SATA drives
Optical Drive	Optional DVD-ROM or DVD-RW
Network Controller	NC107i PCIe Gigabit Ethernet
Storage Controller	Integrated SATA RAID (RAID 0, 1)
Expansion Slots	1 x PCI-e 2.0 x16, 1 x PCI-e 2.0 x1
eSATA	1 x eSATA Port