HP ProLiant DL140 Server Setup and Installation Guide 18
Figure 3-12: Removing the CD-ROM tray
To Remove the CD-ROM tray top cover:
1. Lift the top cover (1).
2. Loosen two the CD-ROM blank screws (2) from the empty tray and remove the CD-ROM
blank (3).
Figure 3-13: Removing the CD-ROM tray top cover
To Install the CD-ROM drive in the tray:
1. Align CD-ROM drive (1) and the top cover (2) along the tray and Press down firmly above
the tray until they are seated in place.
2. Tighten tray screws (3).