HP rp7420 - Command Reference: BCH Menu Commands; Accessing the BCH Interface for an Npartition

Figure C-1 Accessing the BCH Interface for an nPartition
Command Reference: BCH Menu Commands
Table C-1 lists the commands available from the Boot Console Handler (BCH) menus for an
nPartition.
The BCH Menu is accessible from an nPartition console when the nPartition is in an active state
but has not booted an operating system.
The following categories of commands are available:
• “General Commands — Boot Console Handler (BCH)” (page 37).
• “Main Menu Commands — Boot Console Handler (BCH)” (page 37).
• “Configuration Menu Commands — Boot Console Handler (BCH)” (page 37).
• “Information Menu Commands — Boot Console Handler (BCH)” (page 38).
• “Service Menu Commands — Boot Console Handler (BCH)” (page 38).
For details on these commands, use the help (HE) command. At any BCH menu enter the HE
command for details about the specified command, or enter HE for general help.
36 Boot Console Handler (BCH)