HP sb21 - Connecting the HP xb31 to Other Signal Sources

11
Connecting the hp digital projector xb31 to other
signal sources
1. Power Cord
2. Composite Video Cable
3. Audio Cable
4. S-video Cable
5. M1-A to HDTV / Component and USB
Cable (optional accessory)
installation
x
b31
1
2
3
4
5
CAUTION!
Unplugging the projector while
the fan is running may reduce
lamp life.
NOTE: For best performance,
configure the display
mode of your computer’s
graphic card to
1024×768 resolution.
Ensure the timing of the
display mode is
compatible with the
projector. Refer to the
“hp xb31 compatibility
modes” section on
page 35.
S-video Output
Digital Tuner Output
Video Output
Antenna