HP sb21 - Adjusting Projector Display Angle

16
Adjusting the projected image
Adjusting the display angle
To raise the projector display angle:
1. Press and hold the elevation button n.
2. Raise the projector to the desired display angle o, then release the button
to lock the elevation foot into position.
To lower the projector display angle:
1. Press and hold the elevation button n.
2. Lower the projector, then release the button to lock the elevation foot into its
retracted position.
Leveling the Projector
Use the rear elevation foot adjustment p for aligning the projector to the
screen.
operation
x
b31 sb21