HP Spectre 13

Bottom cover
NOTE: The bottom cover spare part kit includes replacement thermal material.
Description Spare part number
In ceramic white nish 941825-001
In dark ash silver nish 941824-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
Remove the bottom cover:
1. Remove the computer rubber feet (1).
The rubber feet are included in the Rubber Foot Kit, spare part numbers 941830-001 (in ceramic white
nish) and 941829-001 (in dark ash silver nish).
2. Remove the ve Phillips M2.0×5.4 screws (2) that secure the bottom cover to the computer.
3. Lift the rear edge of the bottom cover (1) until it separates from the keyboard/top cover.
30 Chapter 5 Removal and replacement procedures