HP Spectre Pro x360 G2 - Downloading HP PC Hardware Diagnostics to USB

3. Remove the keyboard (2).
Reverse this procedure to install the keyboard.
Display assembly
Description Spare part number
13.3-in, ultra wide aspect ratio, TouchScreen 13.3-in, QHD, WLED, BrightView (2560×1440), UWVA,
2.55-mm display assembly (includes display panel cable, microphones, hinges, webcam, and wireless
antenna cables and transceivers)
828822-001
13.3-in, ultra wide aspect ratio, TouchScreen 13.3-in, FHD, WLED, BrightView (1920×1080), UWVA,
2.55-mm display assembly (includes display panel cable, microphones, hinges, webcam, and wireless
antenna cables and transceivers)
828821-001
Before removing the display assembly, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 22), and then remove the following components:
a. Remove the battery (see Battery on page 23).
b. Remove the fan (see Fan on page 27).
c. Remove the system board (see System board on page 31).
Remove the display assembly:
Display assembly 37