HP StorageWorks D2700 User Manual

Front status and UID module
The front status and UID module includes status LEDs and a unit identification (UID) button.
Front UID module LEDs
DescriptionLED statusLED colorLED iconLED
No powerOff
Green1. Health
Enclosure is starting up and
not ready, performing POST
Blinking
Normal, power is onSolid
Normal, no fault conditionsOff
Amber2. Fault
A fault of lesser importance
was detected in the enclosure
chassis or modules
Blinking
A fault of greater importance
was detected in the enclosure
chassis or modules
Solid
Not being identified or power
is off
Off
Blue3. UID
Unit is being identified from
the management utility
Blinking
Unit is being identified from
the UID button being pushed
Solid
Hardware12

HP StorageWorks D2700 Specifications

General

Form Factor	2U
Host Interface	6 Gb/s SAS
Redundant Power Supplies	Yes
Drive Type	SAS/SATA
RAID Support	Depends on the connected controller
Compatibility	HP ProLiant servers
Cooling	Redundant fans
Enclosure Type	Rack-mounted