Before You Begin
26 NAS b2000 v2 Quick Start Guide
Collect Information for Configuration
Choose a host name and collect general information before initializing the
NAS b2000 v2.
Configuration Information
Collect the general information required to initialize the NAS device for both
dynamic host configuration protocols (DHCP) and non-DHCP configurations.
You will be asked for this information during configuration, as shown in Table 3.
Become familiar with this information before attempting to configure the NAS
device.
Plankton_book.book Page 26 Monday, February 3, 2003 4:06 PM
To Next Page
Loading...
