Configuration Setup
30 NAS b2000 v2 Quick Start Guide
Configuration Method
The method for configuring the NAS b2000 v2 is to use the WebUI configuration
application that comes with the NAS b2000 v2.
WebUI Configuration
The NAS b2000 v2 includes a WebUI that is designed to be a graphical,
easy-to-use application that gathers the necessary information for configuration.
The WebUI may be accessed through two methods:
■ Through auto discovery mode using the RapidLaunch utility
■ By host name
Auto Discovery Method (Via RapidLaunch)
The NAS b2000 v2 includes a RapidLaunch CD that can run on any
Windows-based PC using Internet Explorer 5.5 (or later).
Requirements
The following items are required to run the WebUI configuration application:
■ Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same
network segment as the NAS b2000 v2
■ RapidLaunch CD
Note: The NAS b2000 v2 is designed to be deployed without a monitor, keyboard,
and mouse. These ports are available and supported by the NAS device, if used.
Plankton_book.book Page 30 Monday, February 3, 2003 4:06 PM
To Next Page
Loading...
