ActionMeaningError messageError Code
Check the code conversion
table.
Type of conversion does not
match the code conversion
table in double-byte or
single-byte code
conversion.
”Code conversion :
Unmatched exchange kind
and exchange table error”
-684
Use ccnv to display and
check the contents of the
conversion table.
Conversion table area is
broken in double-byte or
single-byte code
conversion.
Code conversion : Broken
exchange table error”
-685
Select Error from the Help
menu to view the system
error code, and then check
the operating system
document for error details.
Memory allocation failed
during double-byte or
single-byte code
conversion.
”Code conversion :
Memory allocate error”
-686
Confirm the FCU
configuration is correct.
Environment area is broken
in double-byte or single-byte
code conversion.
”Code conversion : Broken
environment area error”
-687
Check the Field Definition
file.
Conversion length error
found during double-byte or
single-byte code
conversion. Field size to
convert was 0.
”Code conversion :
Exchange length error”
-688
Confirm the FCU
configuration is correct.
Area to refer/set code to
convert was not specified
in double-byte or single-byte
code conversion.
”Code conversion :
Exchange code read/set
non area error”
-689
Check the Field Definition
file and Edit Option file.
Unexpected error occurred
during double-byte or
single-byte code
conversion.
”Code conversion : Other
error”
-690
Check the input data and
the Edit Option file.
Could not perform
conversion because
conversion mode conflicts
with input data.
”Conflicting with input
data”
-691
Check the Edit Option file.
Single-byte code conversion
in the Edit Option file
contains an incorrect type
of code conversion.
”Edit option file : Wrong
type of code conversion in
the 1 byte code conversion”
-693
Check the Edit Option file.
Single-byte code conversion
in the Edit Option file
contains an incorrect
replacement code for
undefined single-byte
characters.
”Edit option file : Wrong
replacement code for
undefined 1 byte character
in the 1 byte code
conversion”
-694
Troubleshooting90