Installation and Configuration
54 SSL1016 Tape Autoloader Reference Guide
2. Press Enter.
3. On the Configuration submenu, scroll to Time.
Figure 34: Select Time
4. Press Enter.
5. On the Time submenu, scroll to Set Timezone.
Figure 35: Select Set Timezone
6. Press Enter.
The timezone screen appears.
Figure 36: Timezone screen
7. Scroll to set the number of hours difference between your local time and
Greenwich Mean Time (GMT).
8. Press Enter.
SCSI ID
Ethernet
Time
Change Mode
Set Timezone
Set Date/Time
Timezone: set hrs
GMT +0:00
To Next Page
Loading...
