Autoloader Operation
112 SSL1016 Tape Autoloader Reference Guide
Set the Import/Export Slot
To set the I/E slot:
1. On any Web Administration page, click Configurations.
2. If a checkmark appears in the box next to I/E Slot, the I/E slot is enabled.
3. If no checkmark appears in the box next to I/E Slot, the I/E slot is disabled.
4. Click submit.
Figure 85: Import/Export Slot
Any change requires a power cycle of the autoloader and reconfiguration of the
ISV software. If the autoloader is not power cycled:
■ The changes will not occur
■ The front panel red LED flashes and displays a “Please power cycle” message
When the I/E slot is enabled, Slot 16 is designated as the I/E slot.
To Next Page
Loading...
