To Next Page

To Previous Page

CAUTION: Before turning the display panel upside down, make sure the work surface is clear of

tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to

the display panel.

b. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in

front of the display back cover.

c. Release the adhesive strip (2) that secures the display panel cable connector to the display panel.

d. Disconnect the display panel cable (3) from the display panel.

e. Remove the display panel (4).

The display panel is available using the following spare part numbers:

●

832674-001 – 11.6-in, HD, AntiGlare, (1366×768), SVA, LED, flat (3.3.6-mm) display panel

for use only on HP Stream 11 Pro G2 Notebook PC computer models

●

762229-001 – 11.6-in, HD, AntiGlare, (1366×768), SVA, LED, slim (3.0-mm) display panel for

use only on HP Stream Notebook PC computer models

●

834445-001 – 11.6-in, HD, (1366×768), SVA, WLED, flat (3.6-mm) display panel for use only

on HP Stream Notebook PC computer models

13. If it is necessary to replace the display hinges:

a. Remove the four Phillips PM2.5×3.2 broad head screws (1) that secure the display hinges to

the display back cover.

b. Remove the two Phillips PM2.0×2.9 broad head screws (2) that secure the display hinges to

the display back cover.

56 Chapter 5 Removal and replacement procedures

HP Stream 11 Pro G2 User Manual

Questions and Answers: