24
2 System Features
Main Memory
Main Memory
There are two 168-pin DIMM slots on the system board for installing main
memory; DIMM slots 1 and 2. All HP Vectra VLi 8 and VLi 8SF PC models
are supplied with one memory module (either 32 MB or 64 MB non-ECC
SDRAM) in one of the two slots, leaving the other slots free for memory
upgrades. Only HP memory modules are supported.
The slots can be filled in any order. Memory upgrades are available in single
100 MHz modules of 32 MB, 64 MB, 128 MB or 256 MB modules. Note that
although the 256 MB modules are ECC, the ECC feature is not used by this
PC. Replacement of the supplied memory module may be necessary to
obtain the 512 MB maximum memory.
To Next Page
Loading...
Need help?
General