25
2 System Features
Processors
Processors
VLi 8 & VLi 8SF Models
Some models come with a single Pentium II processor and level-2 cache
memory packaged in a self-contained, pre-sealed SECC2 module, installed on
the system board.
Other models come with a single Pentium III processor and level-2 cache
memory packaged in a self-contained, pre-sealed SECC2 module, installed
on the system board.
The position of system board switches is shown below:
The correct processor speed switch settings are indicated on the system
board.
Switch Switch function:
1 Reserved Do not use - OFF (default)
2 BIOS Crisis
Recovery
Should normally be kept in the OFF position. Used in case of
power loss during BIOS update. Refer to flash.txt in the BIOS
package downloadable from the HP Web site.
3 Keyboard
power-on:
ON = enabled (default)
OFF = disabled
4 Clear Password: OFF = disabled (default)
ON= enabled / clear User and Administrator passwords
5 Clear CMOS: OFF = normal (default)
ON = clear CMOS and reload default values in Setup
6- 9 Processor speed, refer to the table on your PC’s system board.
10 Reserved Do not use - OFF (default)
To Next Page
Loading...
Need help?
General