System Features
16 product description
Processors
The XE310 Series 2 is equipped with either a single Socket 370 Intel Celeron or socket 370 Intel Pentium
III processor. The processor is connected to the system board through a Plastic Pin Grid Array (PPGA)
370 Socket. A heat sink covers the processor to prevent it from overheating. The reduction in size
achieved by the Socket 370 Celeron is due to the integration of the L2 cache on the processor die. Like
the Celeron processor, the Pentium III comes in a 370-pin socket (PGA370) package.
To find out more about Socket 370 Celeron and Pentium III technology, refer to the Technical Reference
Manual - PC Technology.
Accessory Board Slots
The XE310 Series 2 has three PCI accessory board slots.
PCI Slot Numbers
Your PC uses logical slot numbers in the BIOS Setup program. You need to know these logical slot
numbers if you want to change the PCI slot configuration in the Setup program. PCI slot numbers are
also indicated on the system board itself.
HP XE310 Series 2 PCI Mapping Table
Bus Device PCI Device Slot
#
0 0 82815 Processor to I/O controller
0 2 82815 Graphics controller
0 8 ICH2: LAN controller
0 30 ICH2: Hub interface to PCI bridge
0 31 ICH2: PCI to LPC bridge
0 31 ICH2: IDE controller
0 31 ICH2: USB controller
0 31 ICH2: SMBus controller
0 31 ICH2: AC97 audio controller
1 2 PCI slot 1 1
1 1 PCI slot 2 2
1 0 PCI slot 3 3
To Next Page
Loading...
Need help?
General