Product features and components 3
Rear components
1 2 3 4 5 6 7 9 108
Component Function
1 Power button Turns the monitor on or off.
2 Next Input/Exit/Back button If the OSD menu is open, press to exit OSD or go
back to upper level.
If the OSD menu is closed, press to switch to the
next video input port. *
3 Up/Increase button/Viewing
Modes
If the OSD menu is open, press to navigate
forward through the OSD menu and increase
adjustment levels.
If the OSD menu is closed, press to open the
Viewing Modes menu. *
4 Down/Decrease button/
Information/Audio adjust
If the OSD menu is open, press to navigate
forward through the OSD menu and decrease
adjustment levels.
If the OSD menu is close,Press to open the
information menu at HDMI and DO auto adjust at
VGA.
5 Menu/OK If the OSD menu is open, press to confirm
selection.
If the OSD menu is closed, press to open the OSD
menu.
6 Security cable slot Attaches an optional security cable to the
monitor.
7 Power connector Connects the AC power to the monitor.
8 HDMI port Connects an HDMI cable to the source device.
9 VGA port Connects the VGA cable to the source device.
10 Audio In Connects the audio cable from the source device
to the monitor.
NOTE: * Buttons 2-4 are function buttons that can be changed from their default settings in
the OSD menu to a different menu selection that you most commonly use and want to quickly
access. See Assigning the Function buttons on page 12 for more information.
NOTE: To view an OSD simulator, visit the HP Customer Self Repair Services Media Library at http://www.
hp.com/go/sml.