4 Chapter 1 Getting started
Setting up the monitor
Installing the monitor stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of
color or disorientation of the liquid crystals. If this occurs, the screen will not recover to its normal condition.
1. Attach the pedestal stand to the base.
2. Position the monitor facedown on a flat surface covered by a clean, dry cloth.
3. Insert the stand into the slot on the back of the monitor, and press until the stand clicks into place.
Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a video cable to the video input port.