3. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
IMPORTANT: To prevent damage to a memory module, hold the module by the edges only. Do not
touch the components on a memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Reverse this procedure to install a memory module.
IMPORTANT: Memory modules are in a stacked conguration. If only one module is installed it must be in
the bottom memory socket.
20 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
