3. From the Computer Setup (F10) Utility menu, select File>Default Setup.
This restores the settings that include boot sequence order and other factory settings. However, it
does not force hardware rediscovery.
4. Choose Restore Factory Settings as Default, and the press F10 to accept.
5. Select File->Apply Defaults and Exit, and then press F10 to accept.
6.
Reset the computer passwords and configuration information, such as the system date and time.
NOTE: This step does not clear the passwords.
180 Chapter 8 Configuring password security and resetting CMOS ENWW
To Next Page
Loading...
