Before removing the keyboard, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 50).
5. Remove the service cover (see
Service cover on page 51).
6. Remove the optical drive (see
Optical drive on page 54).
Remove the keyboard:
1. Loosen the two captive screws that secure the keyboard to the computer.
2. Partially open the computer.
3. Rest and secure the computer on its left side.
64 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
