Table 4-1 OSD Menu (continued)
Icon Main Menu Submenu Description
Sleep Timer Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in hours
and minutes
●
Set Sleep Time—sets the time you want the
monitor to go to sleep
●
Set on Time—sets the time you want the monitor
to wake up from sleep mode
●
Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Language Selects the language in which the OSD menu is
displayed. The factory default is English.
Information Selects and displays important information about the
monitor.
Current Settings Provides the current input video mode.
Recommended Settings Provides the recommended resolution mode and
refresh rate for the monitor.
Serial Number Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
FW Version Reports the version of the driver (firmware).
Backlight Hours Reports the total hours of backlight operation.
Service Support
http://www.hp.com/support
Factory Reset Returns all OSD menu settings and DDC/CI controls to
the factory default settings, except the Language.
Source Control Selects the video input signal. The default is the first
active input when examined in this order: DisplayPort,
DVI-D, HDMI, VGA.
DisplayPort Selects DisplayPort as the video input signal.
DVI Selects DVI-D as the video input signal.
HDMI Selects HDMI as the video input signal.
VGA Selects VGA as the video input signal.
ENWW
Overview of Operation
33
To Next Page
Loading...
Need help?
General
Weight and Dimensions
