Table 4-1 OSD Menu (continued)
Icon Main Menu Submenu Description
Default Source Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The choices are:
●
DisplayPort
●
DVI-D
●
HDMI
●
VGA
The factory default is the first active input when
examined in this order: DisplayPort, DVI-D, HDMI,
VGA.
Auto-Switch Source Lets you prevent the monitor from automatically
switching to another active input when the current
input becomes inactive. If you set Auto-Switch Source
to Off, the monitor will go dark rather than scan for
another active input.
Source Detection This option is displayed in the OSD when a
DisplayPort input is selected. You can set Source
Detection to:
●
Always Active
●
Low Power
The factory default is Low Power.
Exit Exits the OSD menu screen.
34 Chapter 4 Operating the Monitor ENWW
To Next Page
Loading...
Need help?
General
Weight and Dimensions
