HPE D3610 User Manual (English)

Other manuals for HPE D3610

Questions and Answers:

L
Lisa CollierAug 4, 2025
What to do if HPE D3610 does not initialize?
- B
  Benjamin RodriguezAug 4, 2025
  If the HPE Enclosure doesn't initialize, several factors could be at play. Start by ensuring power is correctly applied to the enclosure. Check that the power LED is green, indicating a working power supply. Verify the power source itself is functional. Inspect and reconnect the AC power cords on both power supplies, and confirm the power supplies are properly seated by removing and reinstalling them.
P
Penny HarrisAug 9, 2025
Why is the I/O module fault LED amber on my HPE D3610 Enclosure?
- M
  Mrs. Vanessa Velez DDSAug 9, 2025
  An amber I/O module fault LED on your HPE Enclosure indicates that the I/O module is locked, has failed, or another fault condition exists. Ensure the I/O module is seated properly by pressing it firmly into its bay until the handle clicks into place.
J
Jonathon CraigAug 12, 2025
What does it mean if the power supply LED is amber on HPE D3610 Enclosure?
- J
  Joseph WalkerAug 13, 2025
  If the power supply LED is amber, the power supply might not be inserted properly, the connector might be damaged, or the power supply might have failed. Ensure that the power supply is undamaged and fully seated. Also, check that all pins on connectors and components are straight.
J
Jeremy GarrettAug 17, 2025
How to fix an amber System Health LED on HPE D3610 Enclosure?
- Q
  qwrightAug 17, 2025
  If the System Health LED is amber, it indicates that the system might have experienced a short or the controller firmware might be corrupted. Ensure that all components are fully seated. You may also need to update the controller firmware.
K
Kathryn HughesAug 21, 2025
What to do if the fan LED is amber on HPE D3610?
- D
  Donald MarquezAug 21, 2025
  If the fan LED is amber, the fan might not be inserted properly, the connector might be damaged, or the fan might have failed. Ensure that the fan is undamaged and fully seated.
L
Larry ChenAug 26, 2025
Why is the enclosure front fault LED amber on my HPE?
- V
  Victoria MackAug 27, 2025
  If the enclosure front fault LED is amber, the Front Status and UID module might not be inserted properly, might have a damaged connector, or might have failed. Make sure that the Front Status and UID module is undamaged and is fully seated. Check rear fault LEDs to isolate failed component.
T
Terry ThompsonAug 30, 2025
What does an amber rear fault LED on HPE D3610 Enclosure mean?
- B
  Brian BrownAug 30, 2025
  If the enclosure rear fault LED is amber, the rear power and UID module might not be inserted properly, might have a damaged connector, or might have failed. Be sure that the rear power and UID module is undamaged and is fully seated.

HPE D3610 Specifications

General

Form Factor	2U
Drive Bays	12 LFF
Interface	SAS
Host Interface	12 Gb SAS
Compatibility	HPE ProLiant Servers
Cooling	Redundant fans
Power Supply	Dual hot-plug power supplies