Technical white paper Page 36
Host Control of Write-Back Cache:
Auto-Write Through Cache Trigger Conditions
___________________________________________________
Controller Failure:
Cache Power:
CompactFlash:
Power Supply Failure:
Fan Failure:
Over Temperature Failure:
Auto-Write Through Cache Behaviors
_________________________________________________________
Revert when Trigger Condition Clears:
Notify Other Controller:
Remote Snap Remote System Information
IP address:*
User name:*
Password:*
*If applicable
System user names
Note
SNMP user characteristics (user access vs. trap target, authentication type, privacy type, privacy password, and trap host address)
only need to be set if the SNMPv3 User Definition check box is selected.
To Next Page
Loading...
