6. Remove the front bezel on page 27.
7. Remove the PCI air baffle on page 29.
8. Remove the system air baffle on page 30.
9. Remove the drive bay cover from box 2.
10. Install the non-hot-plug drives.
11. Install the drive cage in box 2.
12. Connect the drive cables.
13. Install the system air baffle on page 31.
14. Install the PCI air baffle on page 30.
15. Install the front bezel on page 28.
16. Install the access panel on page 26.
17. Do one of the following:
64 Hardware options installation
To Next Page
Loading...
