hpmont HD30-4T5P5G/7P5P Manual

Chapter 6 Function Introduction Shenzhen Hpmont Technology Co., Ltd
―50― HD30 Series Inverters User Manual
6.1 Group d: Display Parameters
Group d is status display parameters. The users can directly check the status parameters by
checking the function code of Group d.
6.1.1 Group d00 Status Display Parameters
No. Name Description Range
【
factory setting
】
d00.00
Series of the inverter
【actual value】
Display the series of the inverter.
d00.01
Software version of the U1
【actual value】
Display the software version of the U1.
d00.02
Reserved
d00.03 Non-standard software version of the U1
【
actual value
】
Display the No. non-standard software version of the U1.
d00.04 Reserved
d00.05
Software version of the display panel
【actual value】
Display the software version of the display panel.
d00.06
Custom series No.
【actual value】
Display the custom series No.
d00.07
Motor and control mode
【actual value】
Display the current motor and the control mode.
Units: Display the current driving motor
• 0: Motor 1.
• 1: Motor 2.
Tens: Control mode
• 0: V/f contorl without PG.
• 1: Reserved.
• 2: Vector control without PG.
d00.08
Rated current of the inverter
【actual value】
Display the rated current of the inverter.
d00.09
Extension function of the inverter
【actual value】
Display the extension function of the inverter.
0: Standard inverter.
1: Water and wastewater applications (with HD30-WIO).

hpmont HD30-4T5P5G/7P5P Specifications

General

Brand	hpmont
Model	HD30-4T5P5G/7P5P
Category	Inverter
Language	English