HPRT N130 - Virtual Serial Port Mode Command Settings

N130 User Manual
50
Virtual serial port mode command settings
Start scanning
Operand: 0xE4
Data: 0x00
This feature only supports serial mode.
Stop scanning
Operand: 0xE5
Data: 0x00
This feature only supports serial mode.
Setting barcode convert mode
Operand: 0xEE
Data:
1: Barcode Convert Mode is pack mode
0: Barcode Output Mode is normal mode
Set Illumination prompt switch
Operand: 0xEB
Data:
1: ON
0: OFF