Note: Don’t pull the paper out forcefully while the printer cover is closed or it may damage the
printer. Remove the paper as follows:
1.Press the [PUSH] button of both sides at the same time, then lift the printer cover upward.
2.Remove the paper.
The printer must be powered on and loaded with a ribbon and a sheet of paper. (Refer to 3.2 and 3.3)
1. Download “H-Print” APP: Scan the QR code below to download “H-Print” APP.
Note: You can also scan the QR code on the outer box of the package to download APP.
2. Connect to the printer:
1)Turn on Bluetooth on the mobile phone.
Note: This step is not necessary, save the part about enabling Bluetooth as it is completed in step 3.
2)Open the APP and select “Device Management” from the right top corner;
Note: I was not able to complete this one step. As a new user, I was forced to create an account before I
was able to proceed.
3)Choose “Connect via ‘Settings’ ” or “Search the device via APP”, and select “MT800-XXXX” to connect
(XXXX are last four digits of Bluetooth address)
4)Connection is successful.
To Next Page
Loading...
