Introduction
HTC 420 VS
2 2.0
a section of text, you must pay particular attention when reading
through the text and not carry out any operations of which you are
unsure. This is for your own and other users’ safety and to avoid
damage to machinery or other equipment.
This symbol means Note! and indicates a potential risk of material
damage in the event of incorrect use of the machine or associated
equipment. If you see this symbol next to a section of text, you
must pay particular attention when reading through the text and not
carry out any operations of which you are unsure. This is to avoid
damage to the machinery or other equipment.
This symbol means Tip! You can get tips and advice on ways
to make operating your machine or associated equipment easier,
and to avoid wear. If you see this symbol next to a section of text,
you should read through the text to make your work easier and to
extend the service life of the machine.
1.4. Transportation
The machine is best transported secured to a load pallet.
1.5. On delivery
The following items are included on delivery. Contact your retailer
if anything is missing.
• Grinder
• Manual
• Locking key for control cabinet
• Hammer EZ system
• Splash guard
• Electrical cable with contact
• EZ Grinding holders
• Upper belt (spare part)
To Next Page
Loading...
