HTC 420 VS
Machine description
2.0 7
3. Machine description
3.1. General machine description
The machine is built around a number of main components - see
Figure 3-1 on page 7 and Figure 3-2 on page 8. It has
three motor options: 230 V 1-phase (EU), 400 V 3-phase (EU) and
115 V 1-phase (US).
The machine is built around a chassis with wheels. The motor with
a rotating grinding unit is attached to the bottom of the chassis,
so that there is some movement between the chassis and motor
package.
The handle can be set in a number of different tilt positions. Choose
a position that best suits you.
The grinding cover has a connection for an external suction hose
used for dry grinding.
The machine can easily be equipped with a large number of tools,
depending on the material to be ground. For the different tools, see
HTC’s Product Catalogue under the Grinding Guide tab.
To Next Page
Loading...
