7. Remove the motor plate and the grinding head cover
guide.
8. If the motor cannot be removed, use the removal
tool.
• 15 kW motors: 595 76 16-01
• 7.5 kW motors: 595 76 15-01
9. Remove the lid from the housing. Refer to
To open
the grinding head on page 30
.
10. Put support below the grinding head. Make sure
there is space for the removal tool.
11. Put the removal tool into the center pulley.
12. Turn the removal tool to remove the motor.
950 - 001 - Repair and servicing - 29
To Next Page
Loading...
